Liquid Rubber Polyurethane Smooth Deck Coating (Neutral Beige) forms a hard yet flexible single-component protective membrane that combines polyurethane and acrylic polymers. This easy to apply ultra-low VOC coating can be used to protect decks outdoor walkways and more. Given the cured membrane s superior strength waterproof properties and high adhesion to most substrates Liquid Rubber s Polyurethane Deck Coating is an ideal solution for indoor and outdoor environments. This coating is designed for multiple surfaces including wood concrete and metal and should be applied with 3-4 coats. Application: Can be applied using a brush roller or sprayer to provide a seamless and fully adhered membrane. Ensure a clean dry surface and fill gaps with a high quality wood filler. Apply minimum thickness of 1 gallon/40 sq ft. High traffic areas require 1 gallon/30 sq ft. Apply each coat as soon as possible not allowing extended time between. Ensure coating is dry to the touch with no uncured material underneath before moving on to the next coat. Avoid direct sunlight during application apply about 10C/50F and remove painters tape while still wet. Drying Time: At 25C/77F and 50% relative humidity fully cures in 72 hours at 1mm but curing time increases in colder temperatures or higher humidity. Coverage includes 40 square feet per gallon final coverage after 3-4 generous coats. 30 square feet per gallon for high traffic areas (4-5 generous coats)