The KBRS Shower Ramp is the toughest prefabricated tileable ramp on the market. It is constructed of high density 3 lb EPS core with an extra reinforcing layer of mesh and epoxies. The KBRS Ramp has a 6" run, comes 61" in length and has a 1/4" nominal front edge. It is waterproof, ready to tile and can be cut-to-fit in the field. Coated with ShowerSeal waterproofing membrane High density non-porous EPS core (inhibits mold/mildew growth) Cut-to-Fit in the field Quick and easy installation 100% Water Proof How to Install a KBRS HardCurb 1. Dry fit the HardCurb to the ShowerSlope 2. Cut-to-fit the HardCurb if needed 3. Level HardCurb 4. Apply modified thin-set to desired HardCurb installation area 5. Apply a generous bead of polyurethane sealant (or 100% silicone sealant) to the outer edge of the slope (where the curb will "butt-up" against the slope) 6. Apply modified thin-set to the bottom of the HardCurb 7. Firmly press the curb into place 8. Walk on curb to ensure it has fully embedded into the thin-set - then you are ready to apply modified thin-set and tile (or surface) as desired Installation Instructions