Miracord 50 Turntable Miracord 50 The Miracord 50 Turntable ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription inspired by the iconic Miracord name from the Golden Age of Stereo when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind the Miracord 50 is equipped with a built-in defeatable phono preamplifier allowing you to add this turntable to virtually any music system. Specifications: Turntable Section Drive System : Belt drive Motor : DC motor Selectable Speeds : 33⅓ and 45 rpm Motor Servo : Speed rotation and servo system Rotation Speed Variation : +/-1% Wow and Flutter : 0.1% Signal-to-Noise Ratio : -67 dB or higher (A-weighted) -60 dB or higher (unweighted) Platter : Aluminum die-cast Platter Diameter : 0 in / 300 mm Tonearm Section Type : Aluminum tube static-balanced Effective Arm Length : 8 in / 223.6 mm Stylus Pressure Range : 0 to 4 g Cartridge Weight Range : 3.5 to 6g Effective Arm Mass : 27.4 g Overhang : 18.6 mm Offset Angle : 25 degrees Anti-Skating : Adjustment Supported Main Bearing : Stainless steel Phono Equalizer Amplifier Type : Moving magnet (MM) Phono Output : 2.5 mV (1 kHz 3.54 cm/sec) Line Output : 140 mV (-17 dBV) Phono/Line : Switchable Supported Load Impedance : 47 kΩ Connector : RCA pin jack including RCA cable accessories Voltage : 100 to 240 V AC / 50 to 60 Hz Power Consumption : 1.5 W (less than 0.5 W at standby) Dimensions : (WXHXD) 5.5 x 16.05 x 14.20 Weight : 12.10 lb