Heatshield Armor Tape is used to repair Heatshield Armor or HP Sticky Shield. It may also be used on tight seams of Heatshield Armor as a cosmetic improvement and can be added to the ends of the exposed insulation of HP Sticky Shield to further protect from the elements and extend the product’s life. Heatshield Armor Tape can be used to shield radiant heat from components. The heavy-duty peel-and-stick adhesive is an exhaust tape wrap that will adhere to most clean surfaces. Tape Armor is not intended to hold Heatshield Armor in place; it should only be used on the cold side of insulation for cosmetic reasons. Features: Continuous operating reflective temperature of 1100 degrees F 2000 degrees F intermittent Reflects heat away Also used to seal and repair Heatshield Armor and HP Sticky Shield 0.003 inch thick Size: 2 inch x 39 inch Roll Operational Temperature: 1100 Degrees F Peak Temperature (30 seconds or less): 2000 Degrees F Color: Silver/Aluminum Material: Proprietary Data Made in the USA Sold As Each Installation Tips: Self Adhesive and Radiant heat barrier Requires 1 inch of airspace Not designed for direct contact Warnings: Always wear safety glasses Dust mask gloves and long sleeves are recommended when handling this product Caution this material is electrically conductive Be sure to insulate any terminals that might come in contact with this product