Wind Speed Sensor, Anemometer, High Impact Strength Terminals for Weather Stations Greenhouse Environmental Protection Specification: Condition: 100% Item Type: Wind Speed Sensor Material: Polycarbonate Parameter: DC Power Supply (Default) 10-30V DC Maximum Power Consumption Current Output 1.2W Transmitter Circuit Operating Temperature -20 degrees Celsius to +60 degrees Celsius , 0%RH-80%RH Measuring Range 8 Directions Dynamic Response Time Less than or equal to 0.5s Output Signal Current Output 4-20mA Load Capacity Current Output Less than or equal to 600 Ohm Calculation Method: 0-10V Output Comparison Table Output Value (V) Corresponding Wind Direction ?0 North Wind ?1.4286 Northeast Wind ?2.8571 Wind ?4.2857 Southeast Wind ?5.7143 South Wind ?7.1429 Southwest Wind ?8.5714 West Wind ?10 Northwest Wind Power Wiring: Wide Voltage 10-30V DC Power Input Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 in Weight: Approx. 317g / 11.2oz Common Problems and Solutions: No output or output error possible causes: 1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range. 2) The wiring method is incorrect or the wiring sequence is wrong. 3) The power supply voltage is incorrect (24V power supply for 0-10V type). 4) The distance between the transmitter and the collector is too long, causing signal disturbance. 5) The PLC collection port is damaged. 6) Equipment damage. Package List: 1 x Wind Speed Sensor 1 x Cable 1 x Screw Kit (4 x Screw, 4 x Nut) Note: 1. The user should not disassemble it by himself, and should not touch the sensor core to avoid damage to the product. 2. Keep away from high-power interference equipment as much as possible to avoid inaccurate measurement, such as inverters, motors, etc. When installing or disassembling the transmitter, the power must be disconnected first, and water in the transmitter can cause irreversible changes. 3. Prevent chemical reagents, oil, dust, etc. from directly invading the sensor, do not use it for a long time under condensation and extreme temperature environment, and prevent cold and thermal shock.