JVCC DC-SCRIM-9 Double-Sided Scrim Tape is a thick polyester (PES/PVA) scrim tape coated on both sides (AKA double-coated) with an aggressive modified solvent-free water-based acrylic adhesive. The adhesive system is extremely aggressive and will bond well to nearly all materials; even to difficult surfaces like foam fabrics PE and PP films. This double-sided tape is used for permanent bonding of plastic metal and wood (P.M.W.) surfaces and is primarily designed for use in bonding carpet and plastic baseboard molding to walls ceilings modular units etc. It has a good temperature UV aging and water vapor resistance. APEO/APE Free. The tape comes on a gold 90 gr. siliconized paper release liner. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product s actual size is 48mm x 23m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Silica crystalline (airborne particles of respirable size) which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/. Technical Information - Core: 3 inch diameter neutral - Backing/Carrier: polyester (PES/PVA) scrim - Adhesive: solvent-free water-based modified acrylic - Release Liner: 90 gr. gold siliconized paper - Thickness: 9.1 mils (carrier adhesive) - Adhesion: 109 ounces per inch (to stainless steel test panel) - Service/Operating Temperature: -40F to 203F - Adhesive Weight: 220 grams/square meter