Patco 502A Clear Polyethylene Film Tape combines the conformability abrasion and chemical resistance of polyethylene film with an aggressive adhesive system. It is designed as a general-purpose sealing splicing and seaming tape. Use as a protective film a temporary hold down solution material processing and industrial fabricating applications. Patco 502A performs well in a variety of indoor and outdoor environments and is designed for long-term applications. Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product s actual size is 96mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Core: 3 inch diameter plastic - Backing/Carrier: low-density polyethylene (LDPE) film - Adhesive: acrylic - Thickness: 5.5 mils (carrier adhesive) 4.5 mils (carrier) - Adhesion: 50 ounces per inch (to stainless steel test panel) - Tensile Strength: 11 pounds per inch (longitudinal) - Application Temperature: 50F to 120F - Service/Operating Temperature: -40F to 190F - Elongation: 400 %